Back  
 

LS 106 : LOUNDSPEAKER SWEEP TESTER
Sine/sweep, 40W power

Download PDF
 
     
  HIGHTLIGHTS  
 

Low distortion continuous sine & swept frequency waveforms

Precision & stability of frequency generation

40W rms (w.r.t 4 ) * digital level control * Line output

User setable limit for output voltage
 
 
  (for safety of low power speakers)
LCD display for output signal's frequency & Voltage level (with bar graph)
 
     
 

Audiolec's LS 106 is a Sine/Swept Frequency Generator for Sweep Test of loudspeakers, drivers, horns, Headphones. LS 106 can also be used as a powered Audio SignalGeneratorin testing audio circuits and devices like Crossover Networks, LMTs.

Continuous sine frequency can be varied through either key pad or external rotary control. Output level is varied digitally through keypad. An external keypad is provided for convenience of operation.

A 16 x 2 backlit LCD display shows values of output signal frequency and open circuit (no load) voltage level, Vo. With 0.1 ohm output resistance of amplifier, Actual voltage on speaker is within 2% of displayed value. Line-Output, max. 150mV, provides signal for feeding into any external amplifier.

 
     
  SPECIFICATIONS  
 
Max Power Output : >40W rms into 4 Ohms load
Frequency range : 10 Hz to 32 KHz
Output waveform : continuous Sine/ Swept Frequency
THD : < .1% @25W, 4 Ohms load, 1 KHz
Frequency accuracy : < .05% of displayed value
Vo (open circuit) accuracy : < (1% + .01V)
Operating Power : 230V +/- 10%, 50Hz mains
Environmental : Operating temperature: 10°-50°C, Humidity<90% NC
Mechanical : Dimensions: 270 (W) x 112 (H) x 310 (D) mm
Weight : 6.6 Kg
 
     
   
Copyright © 2007 by Audiolec Instruments. All Rights Reserved.